--- title: "How to Clean Vinyl Records: Dust, Wash, Dry, Re-sleeve" description: "Brush a record dry before each play, and wash it only when it's new to you or visibly dirty. The archive method at home: what to use, and how to dry it." canonical: "https://www.recordbyrecord.app/en/blog/clean-vinyl-records/" locale: "en" published: "2026-10-01" updated: "2026-10-01" --- # How to Clean Vinyl Records Without Harming Them The record came home from a second-hand bin with grey fluff along its edge and a sleeve gone soft at the corners. On the first play it crackles like a fire. Damaged, or just dirty? It may well be dirt, and dirt comes off, provided the cleaning does no harm of its own. The method archives use scales down to a kitchen: brush the dust off dry before every play, wash a record only when it's new to you or visibly dirty, then dry it completely and give it a fresh sleeve. ## When a record needs cleaning, and when it doesn't Dust in the groove causes clicks and pops. On an LP the particles are roughly the size of the stylus tip, and vinyl takes a static charge that draws dust in and holds it in the groove. Under the stylus that dust is also abrasive: pressed against the groove walls, it can etch them permanently, and dirty records wear the stylus itself faster, by Ortofon's account. So cleaning matters, though more of it isn't better. Archives clean every record once, when it joins the collection, and check it again before playing it. The Canadian Conservation Institute adds the counterweight: clean only what is dirty, because **frequent or careless cleaning can cause more problems than leaving a record alone.** How often is where the sources part. Ortofon says to dust records before every play; a 1996 guide from the National Library of Canada, written for archives with cleaning machines, says to clean before each playback; the conservators say only when dirty. Read together, they come to this: **dust before each play, and wash a record only when it's new to you or visibly dirty.** That's our reading of them, not a rule any one of them states. **Cleaning removes dirt, not damage.** Groove wear from a worn or heavy stylus is permanent, and the patterned marks old plastic sleeves leave on a surface don't wash off either; our guide to [reading a used record's past before you pay](https://www.recordbyrecord.app/en/blog/buying-used-vinyl/) covers both. What cleaning does is show you what's left. A clean record is the only fair one to judge, and [how record grading works](https://www.recordbyrecord.app/en/blog/record-grading/) makes sense once the dust is out of the way. ## Before each play: dust it dry Hold the record by its edge and its label. Fingers on the grooves leave skin deposits that add noise, attract dust and give mould something to live on. Then take a soft antistatic or carbon-fibre brush and move it lightly with the groove, never across it. Archives ask for bristles softer than the disc and a motion that follows the groove, and by their account antistatic devices help to varying degrees. For loose dust, the Library of Congress suggests canned air. A brush has its limit, though. Static is what holds the dust, so dry wiping on its own mostly moves it around, and the friction of a cloth can charge the surface and pull dust straight back. Brushing is upkeep. A grey film, a fingerprint or a sticky patch that survives brushing needs water. The stylus gets the dry treatment too: a small brush drawn from the back of the cartridge towards the tip, never the other way and never side to side, and never with fluid of any kind. ## Washing a dirty or second-hand record Washing is the most effective way to clean a record, in the archive standard's own words, and it needs nothing more than a sink or a table, a towel and some patience. The method is the conservators', and their guides agree on its shape: 1. Use distilled, deionised or demineralised water at room temperature, never hot. It leaves no mineral deposits in the groove as it dries, and room temperature spares the disc a thermal shock. 2. Add a few drops of mild, unperfumed detergent to a few litres of water, not enough to lather. Water alone doesn't dissolve grease; the detergent does. 3. Keep the label dry: work on the grooved area only, water kept off the paper. 4. Wash along the groove with a soft brush or a microfibre cloth, working around the record rather than scrubbing across it. 5. Rinse thoroughly with more distilled water, so no detergent is left in the groove. The conservation recipes give exact concentrations of laboratory surfactants. Those are for labs with those chemicals; a few drops of mild detergent is the home version. ## What never to use Start with any fluid that won't say what's in it. The archive standard is plain on this: a cleaning solution that doesn't disclose its chemical composition shouldn't be used on a record, whatever the label promises. Then alcohol on a 78. For about half a century records were commonly made of shellac and played at 78 rpm; vinyl arrived in 1948 and was standard by 1958. **Shellac and lacquer discs should never meet alcohol**, which can corrode them on contact, and old disc materials are hard to tell apart by eye. So treat every 78 as something other than vinyl. On vinyl itself, alcohol is where the sources genuinely disagree. The archive standard allows isopropyl alcohol for greasy deposits; Ortofon recommends no solvents of any kind, on the record or the stylus; and the conservators' own washing methods use none. We don't recommend it. The method every source agrees on works without it. ## Drying, and a fresh sleeve Dry it completely. Pat both sides with a microfibre cloth, which won't leave fibres in the groove, then stand the record upright in a rack until it is dry through. **Never put a damp record back into a sleeve**: trapped moisture moulds the sleeve, and mould damages the disc. Clean records go into fresh inner sleeves, and soft polyethylene is where the conservation guides agree. Avoid PVC, which can stain a disc as its plasticiser migrates out. Paper is disputed: one archive guide says no paper inner sleeves at all, while Ortofon suggests rice paper alongside polyethylene. If you like the original printed inner, keep it in the jacket and put the record itself in polyethylene beside it. Take the shrink-wrap off completely, since it can keep shrinking and warp the record. Then store it upright, never stacked flat, away from heat and light. ## When a cleaning machine is worth it A vacuum cleaning machine does the wash and the drying in one pass. It spreads fluid over the surface, then sucks it back out of the groove with the dirt, and leaves the record clean and dry. It is, in the archive standard's words, often the most effective and efficient way to wet-clean, and Ortofon calls it worth considering for the ease and quality of the result. Ultrasonic baths go further, vibrating a solution around the disc to loosen dirt; the archive standard suggests them for particularly dirty discs or stubborn marks such as dried-on paper. Whether you need one comes down to volume, not to which machine is best. A handful of second-hand records a year is a sink job, and an unhurried one. A machine earns its place when washing by hand holds up records you want to play: when they come home by the boxful and wait by the sink before they reach the turntable. The fluid rule still applies. Know what's in it. ## Then listen Clean, dry and in a fresh sleeve, the record plays with the dust out of the way, which makes this the fair moment to grade it. What you heard, and the fact that it's been cleaned, are worth keeping with that copy in [Record by Record](https://www.recordbyrecord.app/en/). --- HTML version: https://www.recordbyrecord.app/en/blog/clean-vinyl-records/